Co-developed with Joe Breeden and AXESS Racing, Locked-In Bar Ends are engineered to give you more control with reduced fatigue for DH, enduro, and gravity riding. A firm, ergonomic outboard flange supports your hand allowing for a lighter grip on the bars and reduced arm pump, letting you push your limits harder for longer.
Our engineers worked side-by-side with World Cup downhill athletes to iterate the shape and durometer of the Locked-In Bar Ends for a comfortable, confident ergonomic fit. The result is a bar end that drastically reduces rider fatigue and arm pump, allowing you to have more control from the top of the run all the way to bottom.
LIGHTEN YOUR GRIP, PUSH YOUR LIMITS
No more white knuckle descents. Locked-In Bar Ends let you loosen your grip and load the grips and bar ends as necessary during descents. This allows you to freely push the bike down into full-tilt corners for more grip, all while reducing pressure on your hands.
PROTECT YOUR DIGITS
Locked-In Bar Ends extend forward and shield your hands and pinky fingers from tree strikes, with a chamfered leading edge that shrugs off, rather than catching, obstacles that might take you down.
E-BIKE GAME CHANGER
E-bikes are heavy and require extra strength for maneuvering. Locked-In Bar Ends provide additional points of leverage making them easier to handle in aggressive, technical terrain.
ANTI-ROTATION DESIGN
Patent-Pending lobed interface prevents the bar ends from rotating within the handlebar during pinned descents.
COMPATIBILITY
- Compatible with most carbon and aluminum handlebars with an 18.0mm or wider internal diameter.
- Use of the Locked-In Bar Ends requires a grip with an open end. Many grips with closed ends can still be made to work by punching out the closed end.
- Some grips may have a removable bar end but still have a small lip on the plastic liner that keeps the grip from being able to be pushed inboard from the end of the bar [Ergon GA2, GDH]. We recommend removing this lip by sanding it off using a Dremel tool.
- What grips don't work: Grips with angled ends [Ergon GE1 Evo]. We don’t suggest using grips with outboard lock on clamps, especially if the outboard clamp is an integrated bar end [Chromag Squarewave]
INSTALLATION
- Move grips inboard away from the end of the handlebars.
- Insert the bar end and lightly tighten the bolt with a 4mm hex wrench. Don't worry about the angle yet.
- Make sure that the hexagonal pieces of the cap and wedge are interfacing before installing.
- Move the grip back out until it is in contact with the bar end and tighten the lock collar on the grip.
- Loosen bar end, adjust angle, tighten to 3Nm.
- After the wedge expands into the rubber, the rubber will relax. You may need to torque the bar ends multiple times until the bolt stops spinning.
- Check brake lever location. Most likely, you should move your brake lever outboard slightly, so that the outside of your hand is in contact with the bar end while you are still comfortably grabbing the brake.
HELPFUL TIPS
- The angle of your bar ends is critical and differs for each rider based on hand position, wrist "sag", brake position, and even type of riding.
- If you feel any hot spots, a quick angle adjustment is all you need.
- Your grips do need to be moved in slightly. The bar end needs to go over the bar per our installation instructions.
- Your brake levers may need to be adjusted out slightly for proper reach.
TECH SPECS
WEIGHT: 93 g pair
MATERIAL: 80A Durometer Rubber, 6061-T6 aluminum
DIMENSIONS: 101.6 mm x 76.2 mm x 38.1 mm
TOOL REQUIRED: 4 mm Hex Wrench | Torque 3 Nm
Wolf Tooth
Enhance your cycling performance with Wolf Tooth’s premium bike components at Hyper Ride. Browse their high-quality products such as the Wolf Tooth Drop-Stop Chainrings and the Wolf Tooth Cogs, designed for superior functionality and durability. Ideal for mountain biking and road cycling, these components provide excellent performance and reliability. With fast and reliable delivery from Hyper Ride, you’ll receive your Wolf Tooth gear quickly, ensuring your bike is always in top condition.
Auckland Same Day Delivery
Live in Auckland? Get your order today with our Urgent Tonight service.
Excludes surfboards. Surfboards travel separately by van and are priced differently at checkout.
Available Monday to Friday, excluding public holidays. Delivered between 6:00pm and 9:00pm the same day.
Check the zone map below and look for the Urgent Tonight banner on eligible products.
We do not deliver to PO boxes, Great Barrier Island, or the Chatham Islands. Rural deliveries may also take an extra 1–3 working days.
Shipping Rates
| Category | Cost | Delivery | Items |
|---|---|---|---|
| Street Clothing & Footwear | $9.99 | 1–3 working days within New Zealand, plus 1–3 extra days for rural areas. | Street clothing and footwear. |
| Standard Nationwide | $14.99 | 2–3 working days within New Zealand, plus 1–3 extra days for rural areas. | Most items excluding surfboards, soft top surfboards, wakeboards, waterskis, SUPs, and bikes. |
| Medium Items | $19.99 per item | Standard delivery timeframe applies. | Bodyboards, board bags, longboard skateboards, moto boots, and moto helmets. |
| Large Items | $29.99 per item | Standard delivery timeframe applies. | Snowboards, snowboard packages, kneeboards, wakeboards, water skis, and bikes. |
| XLarge Items | $29.99 per item | Standard delivery timeframe applies. | Inflatable stand-up paddle boards. |
Bulky Items
Surfboards, Roof Boxes & Large Bike Racks
These items require special transport arrangements. Delivery can take up to 10 days depending on location within New Zealand.
Surcharges
We recommend delivery to a non-rural town or workplace to avoid this surcharge.
Due to high courier surcharges. Consider delivering to a friend in Auckland City who can bring it out.
Additional Information
Rural Delivery Information
Delivery times for rural areas can vary depending on how often couriers service your location. Some rural deliveries may only be serviced once a week, so we recommend checking with your local rural courier if timing is important.
Order Changes
Once an order has been placed, we cannot process cancellations or edits.
Shipping Days
Orders are not shipped on weekends or public holidays.
Tracking
Need your tracking number? Email ridesupport@hyper.co.nz and we’ll help you out.
Support & Freight
Freight Companies
- Post Haste and Bascik are used for orders shipped from Hyper Ride warehouse.
- Orders sent directly from a supplier will be shipped using the supplier’s nominated courier.
- Tracking details for supplier-direct items are not always sent automatically, so you may need to request them by emailing our customer service team.
Shipping to Australia?
For Australian shipping information, head to our dedicated Shipping AU page.
We currently offer standard shipping only for Australia. All Australian orders are first received at our Auckland HQ, where they are collated and processed for export before dispatch.
$29.99 shipping plus a 2% import fee. The fee may vary depending on the item.
Estimated delivery time is 4–6 business days from dispatch.
Orders do not ship same-day. Processing and export prep can take up to 3 business days.
There are currently no express shipping options available for Australia.
We do not ship surfboards or stand-up paddleboards to Australia. We also cannot deliver to post shops or PO Boxes — a residential or business street address is required.
Shipping Overview
| Shipping Type | Cost | Delivery | Details |
|---|---|---|---|
| Australia Standard Nationwide | $25 + 2% import fee | 4–6 business days from dispatch (estimate only). | Orders are first collated at our Auckland HQ and processed for export before dispatch. Rural and remote areas may take longer. |
How Australian Orders Work
Order Processing
Orders do not ship same-day. All Australian orders first arrive at our Auckland HQ warehouse, where they are collated and processed for export. This can take up to 3 business days before dispatch.
Multiple Items
If your order contains multiple items, we’ll collate them at our Auckland HQ and ship them together so your order arrives in full.
Remote Areas
Delivery to rural or remote parts of Australia, including WA, NT, and Far North QLD, may take longer than the standard 4–6 business day estimate.
Dispatch Schedule
Orders are dispatched Monday to Friday, 8:00am–5:00pm NZ time. Our daily processing cut-off is 3:00pm NZ time. Orders placed after this, on weekends, or on public holidays will be processed the next business day.
Tracking, Customs & Returns
Tracking Your Order
You’ll automatically receive a Team Global Express tracking link once your parcel leaves Auckland and is scanned into the carrier network.
Customs & Duty Charges
International orders may be subject to customs or import duties once they reach Australia. These charges are the responsibility of the recipient. Hyper Ride cannot control, predict, or waive these fees, and we cannot mark orders as gifts.
Returns from Australia
Returns from Australia are not free. For full returns information, including how to lodge a return, please visit our Returns page.
Need Help?
Customer Support
For help with Australian shipping, tracking, or returns, email ridesupport@hyper.co.nz.
Quick Summary
- Standard shipping only for Australia.
- Orders are collated at Auckland HQ before export.
- Dispatch can take up to 3 business days.
- Delivery is estimated at 4–6 business days from dispatch.
- Remote areas may take longer.
