When a puncture strikes just too big and gnarly to seal, the Muc-Off Stealth Tubeless Puncture Plug ultimate backup tool that’s cleverly stored inside your bar ends! The expanding silica plugs included cover most MTB, road and gravel handlebar sizes and the premium CNC Machined Aluminium bar ends are available in 12 anodised colours to match your ride.
Each lightweight and durable set contains everything you need to get back riding when you’re stuck battling a hole that’s just not sealing: a stainless steel 2-in-1 puncture plug reamer tool, a variety of different sized tyre worms and a trimming knife.
WARNING: Keep out of reach of children. The knife has very SHARP EDGES so use with caution. For Road tyres we strongly recommend replacing your plugged tyre once it’s safe to do so, particularly if you want to use with high psi!
(We recommend a max of 80 PSI on a road bike!)
- CNC Machined from 6061 Aluminium.
- Expanding silica plug fits most MTB, Gravel & Road Handlebars with a larger than 17mm inside diameter.
- Supplied with 17mm, 19mm and 21mm silica plugs to fit different handlebar diameters
- Screws into bars using a just a 4mm Allen key
- Plugs and Repairs multiple holes that won’t seal with just sealant
- Compatible with most open-end grips and drops bars with a 84mm straight section at the bar end.
- Dimensions 89 x 27 x 27mm
- Weight: 33g per side (excluding tyre worms)
- Available in 12 anodised colours to match your Muc-Off tubeless valves
- Identify the source of the puncture and remove the debris or puncture source
- Remove the tool from your bars using a 4mm Allen key. (If tool is pre-loaded skip to step 5) Start by using the integrated knurled reamer on the tool to clean and roughen up the hole to ensure a perfect seal.
- If the puncture requires the medium or larger worms then ream the hole several times with the knurled area of the tool, make sure you use a 45 degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!
- Now Grab a tyre worm (you may need to use the tool to help slide out the worms). The largest size is for MTB tyres the medium for gravel tyres and the small for road tyres, but you can select the best one for your sized hole. Now pinch one end of the worm hard between your fingers to flatten it out. (If using the thin worm thread through the tip at the end of the tool, not the main larger slot)
- Thread through gap at the end of the tool so the worm is now sitting centrally on the tool.
- Locate the puncture hole then insert the tool through the hole (at a 45 degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!) until the worm is around halfway through the tyre. Ensure the ends of the worm remain on the outside of the tire.
- Turning the tool slowly clockwise a few revolutions to twist the worm inside the tire and slowly pull up to remove – leaving the worm in your tyre and the hole plugged.
- Re-inflate tyre to your desired pressure. (We recommend a max of 80 PSI on a road bike!)
- Finally, using the knife carefully trim the worm ends. We suggest standing on the non-drive side of your bike and cutting away from the bike. Trim plugs down so there is a minimum of 3-5mm still sticking out of the tyre. (Caution – this is one sharp knife so please use with care and always cut away from your body and not too close to your fingers!!
- Now you’re ready to roll!
- Supplied as a pair:
- 1 x Stainless steel 2-in-1 puncture plug/reamer tool
- 1 x knife trimming tool
- Supplied with 5 x thin tyre worms, 5 x medium tyre worms & 5 x thick tyre worms
Auckland Same Day Delivery
Live in Auckland? Get your order today with our Urgent Tonight service.
Excludes surfboards. Surfboards travel separately by van and are priced differently at checkout.
Available Monday to Friday, excluding public holidays. Delivered between 6:00pm and 9:00pm the same day.
Check the zone map below and look for the Urgent Tonight banner on eligible products.
We do not deliver to PO boxes, Great Barrier Island, or the Chatham Islands. Rural deliveries may also take an extra 1–3 working days.
Shipping Rates
| Category | Cost | Delivery | Items |
|---|---|---|---|
| Street Clothing & Footwear | $9.99 | 1–3 working days within New Zealand, plus 1–3 extra days for rural areas. | Street clothing and footwear. |
| Standard Nationwide | $14.99 | 2–3 working days within New Zealand, plus 1–3 extra days for rural areas. | Most items excluding surfboards, soft top surfboards, wakeboards, waterskis, SUPs, and bikes. |
| Medium Items | $19.99 per item | Standard delivery timeframe applies. | Bodyboards, board bags, longboard skateboards, moto boots, and moto helmets. |
| Large Items | $29.99 per item | Standard delivery timeframe applies. | Snowboards, snowboard packages, kneeboards, wakeboards, water skis, and bikes. |
| XLarge Items | $29.99 per item | Standard delivery timeframe applies. | Inflatable stand-up paddle boards. |
Bulky Items
Surfboards, Roof Boxes & Large Bike Racks
These items require special transport arrangements. Delivery can take up to 10 days depending on location within New Zealand.
Surcharges
We recommend delivery to a non-rural town or workplace to avoid this surcharge.
Due to high courier surcharges. Consider delivering to a friend in Auckland City who can bring it out.
Additional Information
Rural Delivery Information
Delivery times for rural areas can vary depending on how often couriers service your location. Some rural deliveries may only be serviced once a week, so we recommend checking with your local rural courier if timing is important.
Order Changes
Once an order has been placed, we cannot process cancellations or edits.
Shipping Days
Orders are not shipped on weekends or public holidays.
Tracking
Need your tracking number? Email ridesupport@hyper.co.nz and we’ll help you out.
Support & Freight
Freight Companies
- Post Haste and Bascik are used for orders shipped from Hyper Ride warehouse.
- Orders sent directly from a supplier will be shipped using the supplier’s nominated courier.
Shipping to Australia?
For Australian shipping information, head to our dedicated Shipping AU page.
We currently offer standard shipping only for Australia. All Australian orders are first received at our Auckland HQ, where they are collated and processed for export before dispatch.
$25 shipping plus a 2% import fee. The fee may vary depending on the item.
Estimated delivery time is 4–6 business days from dispatch.
Orders do not ship same-day. Processing and export prep can take up to 3 business days.
There are currently no express shipping options available for Australia.
We do not ship surfboards or stand-up paddleboards to Australia. We also cannot deliver to post shops or PO Boxes — a residential or business street address is required.
Shipping Overview
| Shipping Type | Cost | Delivery | Details |
|---|---|---|---|
| Australia Standard Nationwide | $25 + 2% import fee | 4–6 business days from dispatch (estimate only). | Orders are first collated at our Auckland HQ and processed for export before dispatch. Rural and remote areas may take longer. |
How Australian Orders Work
Order Processing
Orders do not ship same-day. All Australian orders first arrive at our Auckland HQ warehouse, where they are collated and processed for export. This can take up to 3 business days before dispatch.
Multiple Items
If your order contains multiple items, we’ll collate them at our Auckland HQ and ship them together so your order arrives in full.
Remote Areas
Delivery to rural or remote parts of Australia, including WA, NT, and Far North QLD, may take longer than the standard 4–6 business day estimate.
Dispatch Schedule
Orders are dispatched Monday to Friday, 8:00am–5:00pm NZ time. Our daily processing cut-off is 3:00pm NZ time. Orders placed after this, on weekends, or on public holidays will be processed the next business day.
Tracking, Customs & Returns
Tracking Your Order
You’ll automatically receive a Team Global Express tracking link once your parcel leaves Auckland and is scanned into the carrier network.
Customs & Duty Charges
International orders may be subject to customs or import duties once they reach Australia. These charges are the responsibility of the recipient. Hyper Ride cannot control, predict, or waive these fees, and we cannot mark orders as gifts.
Returns from Australia
Returns from Australia are not free. For full returns information, including how to lodge a return, please visit our Returns page.
Need Help?
Customer Support
For help with Australian shipping, tracking, or returns, email ridesupport@hyper.co.nz.
Quick Summary
- Standard shipping only for Australia.
- Orders are collated at Auckland HQ before export.
- Dispatch can take up to 3 business days.
- Delivery is estimated at 4–6 business days from dispatch.
- Remote areas may take longer.
